Diagnostic tool for Rover, MG and Landrover cars

Save money on garage bill - Diagnose that sensor fault - Get live data from a running engine - Clear that warning light and pass your MOT


A PC-based tool to read error codes and live data parameters from engine, ABS and airbag ECUs fitted to Rover, MG and Landrover cars.

Own a Rover, MG, Series One Elise or K series Caterham? Want to fix it yourself?

You can't fix your car if you don't know what's wrong with it. If your car has a fault light on you can read the error codes to narrow down the fault, but only if you have a compatible diagnostic tool.

There are loads of cheap diagnostic tools on ebay, why not buy one of those?

At pscan.uk we have implemented most of the Rover specific protocols and can connect to most Rover, MG and Landrover engines (including the ones which are not OBD2 compliant), ABS and airbag systems.

With garage fees running at £60 to £100 per hour and professional diagnostic tools costing thousands, you will only have to use a pscan.uk diagnostic tool two or three times and it will have paid for itself.

Click here to see the PC operating systems and ECU types supported by the tool.

Order now

In stock

£154 + shipping


June 2018 - Freelander Teves Mk20 ABS support added

Improvements also made to Teves Mk25.

February 2018 - LE500, TF135 and 85 Anniversary Edition TF Service light reset

We are now able to reset the service light on these vehicles.

January 2018 - Pektron SCU

We are now able to code fobs, read the EKA and actuate outputs on Pektron vehicles.

October 2015 - EDC 1.3.1 220/420/620D, Freelander L Series, 300TDI, P38 D

EDC 1.3.1 diesel ECU support added.

28 October 2015 - Landrover TD5 ECU support

We have now added support for the Landrover TD5 ECU. This includes reading and clearing error codes, as well as reading a wide range of live engine data - see this page for details.

15 May 2015 - MEMS1.6 ECU support

We now have support for the MEMS1.6 ECU. If you have a Rover with this ECU, it probably has a Rover 3-pin connector instead of a standard 16-pin J1962 connector, so you will need a special adaptor cable which we can supply for £32.

26 March 2015 - New website design

Please let us know if you have any issues viewing the new website.

15 June 2014 - Demo day

We held a very successful demonstration day at two venues. See the results at the MGF Register forum and the 75 and ZT Club forum.