DDR Version V1.09 20210630 ln ddrconfig:7 LPDDR4X, 324MHz BW=32 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB tdqss: cs0 dqs0: -24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -168ps, tdqss: cs1 dqs0: 24ps, dqs1: -120ps, dqs2: -48ps, dqs3: -168ps, change to: 324MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x62 change to: 528MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x58 change to: 780MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x58 change to: 1560MHz(final freq) PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:22% dram drv:40,odt:80 vref_ca:00000071 clk skew:0x21 cs 0: the read training result: DQS0:0x34, DQS1:0x35, DQS2:0x34, DQS3:0x2e, min :0x12 0xe 0x13 0x11 0x2 0x6 0xb 0x4 , 0xe 0xc 0x8 0x1 0xe 0xe 0x13 0xd , 0x13 0x11 0xd 0xb 0x3 0x0 0x4 0x6 ,0x11 0xb 0xa 0x2 0x13 0x11 0x12 0x12 , mid :0x28 0x28 0x2a 0x27 0x1a 0x1e 0x21 0x1c ,0x23 0x23 0x1d 0x1a 0x26 0x27 0x29 0x25 , 0x2a 0x29 0x24 0x23 0x1c 0x18 0x1a 0x1d ,0x27 0x21 0x1f 0x1a 0x28 0x28 0x26 0x29 , max :0x3f 0x43 0x42 0x3e 0x32 0x37 0x38 0x34 ,0x39 0x3a 0x32 0x34 0x3e 0x40 0x3f 0x3e , 0x41 0x41 0x3b 0x3c 0x36 0x30 0x30 0x35 ,0x3d 0x38 0x35 0x32 0x3e 0x3f 0x3a 0x40 , range:0x2d 0x35 0x2f 0x2d 0x30 0x31 0x2d 0x30 ,0x2b 0x2e 0x2a 0x33 0x30 0x32 0x2c 0x31 , 0x2e 0x30 0x2e 0x31 0x33 0x30 0x2c 0x2f ,0x2c 0x2d 0x2b 0x30 0x2b 0x2e 0x28 0x2e , the write training result: DQS0:0x1d, DQS1:0xe, DQS2:0x18, DQS3:0x0, min :0x6d 0x6f 0x71 0x6f 0x5c 0x61 0x67 0x66 0x67 ,0x53 0x54 0x4f 0x50 0x57 0x59 0x5c 0x57 0x56 , 0x64 0x64 0x5d 0x5f 0x55 0x54 0x55 0x5b 0x5f ,0x4c 0x4a 0x47 0x44 0x50 0x50 0x4c 0x52 0x4a , mid :0x88 0x8a 0x8c 0x89 0x75 0x79 0x7f 0x7d 0x7f ,0x70 0x6f 0x69 0x6a 0x72 0x72 0x74 0x71 0x70 , 0x80 0x7e 0x77 0x79 0x6f 0x6d 0x6e 0x74 0x77 ,0x67 0x62 0x5f 0x5c 0x69 0x6b 0x64 0x6c 0x63 , max :0xa3 0xa5 0xa8 0xa3 0x8f 0x92 0x98 0x95 0x98 ,0x8d 0x8a 0x83 0x84 0x8d 0x8b 0x8d 0x8b 0x8b , 0x9c 0x98 0x92 0x94 0x8a 0x87 0x87 0x8d 0x90 ,0x83 0x7b 0x78 0x75 0x83 0x86 0x7c 0x87 0x7c , range:0x36 0x36 0x37 0x34 0x33 0x31 0x31 0x2f 0x31 ,0x3a 0x36 0x34 0x34 0x36 0x32 0x31 0x34 0x35 , 0x38 0x34 0x35 0x35 0x35 0x33 0x32 0x32 0x31 ,0x37 0x31 0x31 0x31 0x33 0x36 0x30 0x35 0x32 , cs 1: the read training result: DQS0:0x31, DQS1:0x33, DQS2:0x38, DQS3:0x30, min :0x13 0xf 0x13 0x10 0x2 0x6 0xb 0x3 , 0xe 0xc 0x8 0x2 0x10 0xe 0x15 0xd , 0x17 0x12 0xe 0xc 0x4 0x1 0x4 0x8 ,0x11 0xc 0xa 0x2 0x15 0x12 0x12 0x13 , mid :0x28 0x29 0x2a 0x26 0x19 0x1e 0x21 0x1b ,0x23 0x23 0x1c 0x1a 0x27 0x26 0x29 0x24 , 0x2e 0x2b 0x26 0x25 0x1e 0x1a 0x1c 0x20 ,0x28 0x23 0x21 0x1a 0x2a 0x29 0x27 0x2a , max :0x3e 0x43 0x42 0x3c 0x30 0x36 0x38 0x34 ,0x39 0x3a 0x30 0x33 0x3e 0x3e 0x3e 0x3c , 0x45 0x44 0x3e 0x3e 0x38 0x34 0x35 0x38 ,0x3f 0x3a 0x38 0x33 0x3f 0x41 0x3c 0x42 , range:0x2b 0x34 0x2f 0x2c 0x2e 0x30 0x2d 0x31 ,0x2b 0x2e 0x28 0x31 0x2e 0x30 0x29 0x2f , 0x2e 0x32 0x30 0x32 0x34 0x33 0x31 0x30 ,0x2e 0x2e 0x2e 0x31 0x2a 0x2f 0x2a 0x2f , the write training result: DQS0:0x1d, DQS1:0xe, DQS2:0x18, DQS3:0x0, min :0x73 0x75 0x77 0x74 0x65 0x68 0x6d 0x6c 0x6f ,0x52 0x52 0x4e 0x4e 0x55 0x58 0x59 0x57 0x54 , 0x62 0x62 0x5c 0x5c 0x53 0x51 0x54 0x59 0x5d ,0x4b 0x49 0x46 0x43 0x4f 0x50 0x4c 0x51 0x4a , mid :0x8f 0x90 0x93 0x8f 0x7d 0x80 0x87 0x84 0x87 ,0x6e 0x6e 0x67 0x68 0x70 0x70 0x72 0x70 0x6e , 0x7f 0x7c 0x77 0x77 0x6e 0x6b 0x6c 0x72 0x75 ,0x67 0x62 0x5f 0x5c 0x69 0x6b 0x64 0x6c 0x63 , max :0xab 0xab 0xaf 0xab 0x96 0x98 0xa1 0x9d 0xa0 ,0x8b 0x8a 0x81 0x82 0x8b 0x89 0x8b 0x8a 0x89 , 0x9c 0x97 0x92 0x92 0x8a 0x85 0x85 0x8b 0x8d ,0x83 0x7c 0x79 0x75 0x83 0x87 0x7c 0x87 0x7c , range:0x38 0x36 0x38 0x37 0x31 0x30 0x34 0x31 0x31 ,0x39 0x38 0x33 0x34 0x36 0x31 0x32 0x33 0x35 , 0x3a 0x35 0x36 0x36 0x37 0x34 0x31 0x32 0x30 ,0x38 0x33 0x33 0x32 0x34 0x37 0x30 0x36 0x32 , CA Training result: cs:0 min :0x40 0x43 0x34 0x32 0x34 0x31 0x40 ,0x3f 0x37 0x34 0x30 0x35 0x30 0x40 , cs:0 mid :0x7f 0x82 0x72 0x71 0x72 0x70 0x6f ,0x7c 0x79 0x71 0x6f 0x72 0x6f 0x6d , cs:0 max :0xbe 0xc1 0xb1 0xb0 0xb1 0xaf 0x9e ,0xb9 0xbb 0xaf 0xae 0xb0 0xaf 0x9b , cs:0 range:0x7e 0x7e 0x7d 0x7e 0x7d 0x7e 0x5e ,0x7a 0x84 0x7b 0x7e 0x7b 0x7f 0x5b , cs:1 min :0x43 0x47 0x38 0x39 0x38 0x34 0x42 ,0x3e 0x3b 0x33 0x33 0x33 0x33 0x40 , cs:1 mid :0x83 0x85 0x77 0x75 0x76 0x72 0x73 ,0x7c 0x79 0x72 0x6f 0x72 0x6f 0x6d , cs:1 max :0xc4 0xc3 0xb6 0xb2 0xb4 0xb1 0xa5 ,0xba 0xb8 0xb2 0xac 0xb2 0xab 0x9b , cs:1 range:0x81 0x7c 0x7e 0x79 0x7c 0x7d 0x63 ,0x7c 0x7d 0x7f 0x79 0x7f 0x78 0x5b , out U-Boot SPL board init U-Boot SPL 2017.09-armbian (Oct 31 2021 - 15:05:13) unknown raw ID phN unrecognized JEDEC id bytes: 00, 00, 00 Trying to boot from MMC2 ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(5938a9cdfc...) + OK ## Checking uboot 0x00a00000 ... sha256(c8617ab586...) + OK ## Checking fdt 0x00b20530 ... sha256(30938731de...) + OK ## Checking atf-2 0x00068000 ... sha256(0965dc8022...) + OK ## Checking atf-3 0xfdcd0000 ... sha256(be991af043...) + OK ## Checking atf-4 0xfdcc9000 ... sha256(695349eb36...) + OK ## Checking atf-5 0x00066000 ... sha256(315a4195a9...) + OK ## Checking optee 0x08400000 ... sha256(b8cddafab0...) + OK Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000) Total: 265.109 ms INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-167-g81e0b993a-dirty:xsf NOTICE: BL31: Built : 11:20:08, Sep 6 2021 INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: pmu v1 is valid INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 I/TC: I/TC: Start rockchip platform init I/TC: Rockchip release version: 1.0 I/TC: OP-TEE version: 3.6.0-307-g0b06ae94 #1 Fri May 7 01:52:27 UTC 2021 aarch64 I/TC: Initialized INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9 U-Boot 2017.09-armbian (Oct 31 2021 - 15:05:13 +0300) Model: Firefly RK3568 Board PreSerial: 2, raw, 0xfe660000 DRAM: 4 GiB Sysmem: init Relocation Offset: ed358000 Relocation fdt: eb9f8210 - eb9fece0 CR: M/C/I Using default environment no mmc device at slot 1 dwmmc@fe2b0000: 1 (SD), dwmmc@fe2c0000: 2, sdhci@fe310000: 0 Bootdev(atags): mmc 1 MMC1: Legacy, 52Mhz PartType: EFI No misc partition boot mode: None FIT: No boot partition No resource partition No resource partition Failed to load DTB, ret=-19 Failed to get kernel dtb, ret=-19 io-domain: OK Model: Firefly RK3568 Board rockchip_set_serialno: could not find efuse/otp device CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 780000 KHz gpll 1188000 KHz cpll 1000000 KHz npll 24000 KHz vpll 24000 KHz hpll 24000 KHz ppll 100000 KHz armclk 816000 KHz aclk_bus 150000 KHz pclk_bus 50000 KHz aclk_top_high 300000 KHz aclk_top_low 200000 KHz hclk_top 150000 KHz pclk_top 50000 KHz aclk_perimid 300000 KHz hclk_perimid 150000 KHz pclk_pmu 50000 KHz Net: No ethernet found. Hit key to stop autoboot('CTRL+C'): 0 ## Booting FIT Image FIT: No boot partition FIT: No FIT image Could not find misc partition ANDROID: reboot reason: "(none)" optee api revision: 2.0 TEEC: Waring: Could not find security partition Not AVB images, AVB skip android_image_load_by_partname: Can't find part: boot Android image load failed Android boot failed, error -1. starting USB... Bus dwc3@fcc00000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus dwc3@fd000000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus dwc3@fcc00000 for devices... 1 USB Device(s) found scanning bus dwc3@fd000000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 356 bytes read in 11 ms (31.3 KiB/s) 1: Armbian Retrieving file: /boot/uInitrd 6111650 bytes read in 530 ms (11 MiB/s) Retrieving file: /boot/Image 26630152 bytes read in 2238 ms (11.3 MiB/s) append: root=UUID=2c34d77c-e86b-45e8-b46f-cbab956d74a2 console=uart8250,mmio32,0xfe660000 console=tty0 rootflags=data=writeback rw no_console_sn Retrieving file: /boot/dtb/rockchip/rk3566-firefly-roc-pc.dtb 104865 bytes read in 60 ms (1.7 MiB/s) Fdt Ramdisk skip relocation ## Loading init Ramdisk from Legacy Image at 0a200000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 6111586 Bytes = 5.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 0x0a100000 Booting using the fdt blob at 0x0a100000 Using Device Tree in place at 000000000a100000, end 000000000a11c9a0 can't found rockchip,drm-logo, use rockchip,fb-logo WARNING: could not set reg FDT_ERR_BADOFFSET. failed to reserve fb-loader-logo memory Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000) Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000) Total: 6683.897 ms Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 4.19.211 (root@vbox) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)),1 [ 0.000000] Machine model: Pine64 RK3566 Quartz64-A Board [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] cma: Reserved 16 MiB at 0x00000000ef000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 24 pages/cpu s60776 r8192 d29336 u98304 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027656 [ 0.000000] Kernel command line: root=UUID=2c34d77c-e86b-45e8-b46f-cbab956d74a2 console=uart8250,mmio32,0xfe660000 console=tty0 rootflags=dan [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0xeafff000-0xeefff000] (64MB) [ 0.000000] Memory: 3969520K/4175872K available (16446K kernel code, 2390K rwdata, 5340K rodata, 1792K init, 2260K bss, 189968K reserved, 16) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 56274 entries in 220 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: MBI range [296:319] [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000 [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 0.000000] random: random: get_random_bytes called from start_kernel+0x35c/0x4dc with crng_init=0 [ 0.000000] rockchip_clk_register_muxgrf: regmap not available [ 0.000000] rockchip_clk_register_branches: failed to register clock clk_32k_ioe: -524 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.002008] Console: colour dummy device 80x25 [ 0.002451] console [tty0] enabled [ 0.002795] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 4.19.211 (root@vbox) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)),1 [ 0.000000] Machine model: Pine64 RK3566 Quartz64-A Board [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] cma: Reserved 16 MiB at 0x00000000ef000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 24 pages/cpu s60776 r8192 d29336 u98304 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027656 [ 0.000000] Kernel command line: root=UUID=2c34d77c-e86b-45e8-b46f-cbab956d74a2 console=uart8250,mmio32,0xfe660000 console=tty0 rootflags=dan [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0xeafff000-0xeefff000] (64MB) [ 0.000000] Memory: 3969520K/4175872K available (16446K kernel code, 2390K rwdata, 5340K rodata, 1792K init, 2260K bss, 189968K reserved, 16) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 56274 entries in 220 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: MBI range [296:319] [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000 [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 0.000000] random: random: get_random_bytes called from start_kernel+0x35c/0x4dc with crng_init=0 [ 0.000000] rockchip_clk_register_muxgrf: regmap not available [ 0.000000] rockchip_clk_register_branches: failed to register clock clk_32k_ioe: -524 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.002008] Console: colour dummy device 80x25 [ 0.002451] console [tty0] enabled [ 0.002795] bootconsole [uart8250] disabled [ 0.003253] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.003286] pid_max: default: 32768 minimum: 301 [ 0.003523] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003565] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.005567] ASID allocator initialised with 32768 entries [ 0.005760] rcu: Hierarchical SRCU implementation. [ 0.009936] smp: Bringing up secondary CPUs ... [ 0.010788] Detected VIPT I-cache on CPU1 [ 0.010827] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 0.010873] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.011805] Detected VIPT I-cache on CPU2 [ 0.011839] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 0.011873] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.012861] Detected VIPT I-cache on CPU3 [ 0.012893] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 [ 0.012927] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.013062] smp: Brought up 1 node, 4 CPUs [ 0.013203] SMP: Total of 4 processors activated. [ 0.013221] CPU features: detected: GIC system register CPU interface [ 0.013239] CPU features: detected: Privileged Access Never [ 0.013256] CPU features: detected: LSE atomic instructions [ 0.013272] CPU features: detected: User Access Override [ 0.013292] CPU features: detected: 32-bit EL0 Support [ 0.013309] CPU features: detected: RAS Extension Support [ 0.013487] CPU: All CPU(s) started at EL2 [ 0.013534] alternatives: patching kernel code [ 0.021969] devtmpfs: initialized [ 0.045484] Registered cp15_barrier emulation handler [ 0.045527] Registered setend emulation handler [ 0.045895] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.045940] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.046773] xor: measuring software checksum speed [ 0.077842] 8regs : 1561.200 MB/sec [ 0.111260] 8regs_prefetch: 1422.000 MB/sec [ 0.144680] 32regs : 1988.400 MB/sec [ 0.178103] 32regs_prefetch: 1771.200 MB/sec [ 0.178126] xor: using function: 32regs (1988.400 MB/sec) [ 0.178151] pinctrl core: initialized pinctrl subsystem [ 0.179325] NET: Registered protocol family 16 [ 0.180170] audit: initializing netlink subsys (disabled) [ 0.180440] audit: type=2000 audit(0.173:1): state=initialized audit_enabled=0 res=1 [ 0.183728] cpuidle: using governor menu [ 0.183787] Registered FIQ tty driver [ 0.184419] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.186207] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.220382] rockchip-gpio fdd60000.gpio: probed gpio0 (fdd60000.gpio) [ 0.221141] rockchip-gpio fe740000.gpio: probed gpio1 (fe740000.gpio) [ 0.221895] rockchip-gpio fe750000.gpio: probed gpio2 (fe750000.gpio) [ 0.222612] rockchip-gpio fe760000.gpio: probed gpio3 (fe760000.gpio) [ 0.223330] rockchip-gpio fe770000.gpio: probed gpio4 (fe770000.gpio) [ 0.223528] rockchip-pinctrl pinctrl: probed pinctrl [ 0.239510] cryptd: max_cpu_qlen set to 1000 [ 0.296914] raid6: int64x1 gen() 154 MB/s [ 0.353331] raid6: int64x1 xor() 200 MB/s [ 0.410235] raid6: int64x2 gen() 278 MB/s [ 0.466895] raid6: int64x2 xor() 366 MB/s [ 0.523753] raid6: int64x4 gen() 425 MB/s [ 0.580485] raid6: int64x4 xor() 440 MB/s [ 0.637387] raid6: int64x8 gen() 439 MB/s [ 0.694051] raid6: int64x8 xor() 410 MB/s [ 0.751029] raid6: neonx1 gen() 290 MB/s [ 0.807660] raid6: neonx1 xor() 492 MB/s [ 0.864468] raid6: neonx2 gen() 476 MB/s [ 0.921254] raid6: neonx2 xor() 663 MB/s [ 0.978072] raid6: neonx4 gen() 748 MB/s [ 1.034826] raid6: neonx4 xor() 844 MB/s [ 1.091615] raid6: neonx8 gen() 769 MB/s [ 1.148383] raid6: neonx8 xor() 823 MB/s [ 1.148404] raid6: using algorithm neonx8 gen() 769 MB/s [ 1.148422] raid6: .... xor() 823 MB/s, rmw enabled [ 1.148440] raid6: using neon recovery algorithm [ 1.148731] fbcon: Taking over console [ 1.150083] vbus: supplied by vcc12v_dcin [ 1.150576] vcc5v0_usb: supplied by vcc12v_dcin [ 1.151385] vcc5v0_usb20_host: supplied by vcc5v0_usb [ 1.151887] vcc5v0_usb20_otg: regulator get failed, ret=-517 [ 1.152466] vcc3v3_pcie_p: regulator get failed, ret=-517 [ 1.153039] vcc3v3_sd: regulator get failed, ret=-517 [ 1.153471] vcc_sys: supplied by vbus [ 1.154005] vcc_wl: supplied by vcc_sys [ 1.155438] SCSI subsystem initialized [ 1.155798] usbcore: registered new interface driver usbfs [ 1.155887] usbcore: registered new interface driver hub [ 1.155961] usbcore: registered new device driver usb [ 1.156097] media: Linux media interface: v0.10 [ 1.156157] videodev: Linux video capture interface: v2.00 [ 1.156277] pps_core: LinuxPPS API ver. 1 registered [ 1.156299] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.156349] PTP clock support registered [ 1.156764] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 1.158637] Advanced Linux Sound Architecture Driver Initialized. [ 1.159365] Bluetooth: Core ver 2.22 [ 1.159426] NET: Registered protocol family 31 [ 1.159447] Bluetooth: HCI device and connection manager initialized [ 1.159476] Bluetooth: HCI socket layer initialized [ 1.159500] Bluetooth: L2CAP socket layer initialized [ 1.159573] Bluetooth: SCO socket layer initialized [ 1.160940] clocksource: Switched to clocksource arch_sys_counter [ 1.302494] VFS: Disk quotas dquot_6.6.0 [ 1.302605] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.302784] FS-Cache: Loaded [ 1.316372] thermal thermal_zone0: power_allocator: sustainable_power will be estimated [ 1.316550] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 1.316979] NET: Registered protocol family 2 [ 1.317268] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 1.319807] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes) [ 1.319932] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 1.320225] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 1.321270] TCP: Hash tables configured (established 32768 bind 32768) [ 1.321458] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 1.321685] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 1.322090] NET: Registered protocol family 1 [ 1.322859] RPC: Registered named UNIX socket transport module. [ 1.322886] RPC: Registered udp transport module. [ 1.322904] RPC: Registered tcp transport module. [ 1.322920] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.324336] Trying to unpack rootfs image as initramfs... [ 1.638918] Freeing initrd memory: 5964K [ 1.640316] kvm [1]: 16-bit VMID [ 1.640355] kvm [1]: GICv3: no GICV resource entry [ 1.640375] kvm [1]: disabling GICv2 emulation [ 1.640393] kvm [1]: GIC system register CPU interface enabled [ 1.640601] kvm [1]: vgic interrupt IRQ1 [ 1.640817] kvm [1]: VHE mode initialized successfully [ 1.643044] Initialise system trusted keyrings [ 1.643300] workingset: timestamp_bits=45 max_order=20 bucket_order=0 [ 1.654064] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.655075] NFS: Registering the id_resolver key type [ 1.655127] Key type id_resolver registered [ 1.655147] Key type id_legacy registered [ 1.655947] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.656864] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1.663660] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 1.666562] ocfs2: Registered cluster interface o2cb [ 1.666895] OCFS2 User DLM kernel interface loaded [ 1.669019] gfs2: GFS2 installed [ 1.672231] NET: Registered protocol family 38 [ 1.672282] Key type asymmetric registered [ 1.672303] Asymmetric key parser 'x509' registered [ 1.672374] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.672611] io scheduler noop registered [ 1.672636] io scheduler deadline registered [ 1.672850] io scheduler cfq registered (default) [ 1.672875] io scheduler mq-deadline registered [ 1.672893] io scheduler kyber registered [ 1.675514] phy phy-fe8a0000.usb2-phy.0: Linked as a consumer to regulator.4 [ 1.675725] rockchip-usb2phy fe8a0000.usb2-phy: failed to create phy [ 1.675838] phy phy-fe8a0000.usb2-phy.0: Dropping the link to regulator.4 [ 1.676572] phy phy-fe8b0000.usb2-phy.1: Linked as a consumer to regulator.4 [ 1.676793] phy phy-fe8b0000.usb2-phy.2: Linked as a consumer to regulator.4 [ 1.677048] phy phy-fe8b0000.usb2-phy.2: Linked as a consumer to regulator.2 [ 1.679964] naneng-combphy fe830000.phy: Failed to get clk 'refclk': -2 [ 1.680649] naneng-combphy fe840000.phy: Failed to get clk 'refclk': -2 [ 1.683554] rk-pcie 3c0000000.pcie: get pcie-dbi failed [ 1.683589] rk-pcie 3c0000000.pcie: resource init failed [ 1.692953] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330 [ 1.692996] dma-pl330 fe530000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.696382] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330 [ 1.696419] dma-pl330 fe550000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.698706] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 1.699504] fdd50000.serial: ttyS0 at MMIO 0xfdd50000 (irq = 16, base_baud = 1500000) is a 16550A [ 1.700635] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 33, base_baud = 1500000) is a 16550A [ 1.700872] serial serial0: tty port ttyS1 registered [ 1.701339] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 34, base_baud = 1500000) is a 16550A [ 1.701648] ttyS2 set divisor fail, quot:1 != dll,dlh:0 [ 1.807470] console [ttyS2] enabled [ 1.816030] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.817677] brd: module loaded [ 1.827759] loop: module loaded [ 1.828720] zram: Added device: zram0 [ 1.829222] lkdtm: No crash points registered, enable through debugfs [ 1.831556] naneng-combphy fe830000.phy: No refclk found [ 1.832051] naneng-combphy fe830000.phy: failed to init phy for sata [ 1.832668] ahci fc400000.sata: forcing port_map 0x0 -> 0x1 [ 1.833226] ahci fc400000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 1.834002] ahci fc400000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst [ 1.834828] ahci fc400000.sata: port 0 is not capable of FBS [ 1.836583] scsi host0: ahci [ 1.837347] ata1: SATA max UDMA/133 mmio [mem 0xfc400000-0xfc400fff] port 0x100 irq 10 [ 1.839779] libphy: Fixed MDIO Bus: probed [ 1.840206] CAN device driver interface [ 1.842320] rk_gmac-dwmac fe010000.ethernet: phy regulator is not available yet, deferred probing [ 1.844495] usbcore: registered new interface driver rndis_wlan [ 1.845113] usbcore: registered new interface driver rtl8150 [ 1.845683] usbcore: registered new interface driver r8152 [ 1.846236] usbcore: registered new interface driver asix [ 1.846777] usbcore: registered new interface driver ax88179_178a [ 1.847386] usbcore: registered new interface driver cdc_ether [ 1.848002] usbcore: registered new interface driver rndis_host [ 1.848614] usbcore: registered new interface driver cdc_ncm [ 1.849178] usbcore: registered new interface driver qmi_wwan [ 1.849763] usbcore: registered new interface driver cdc_mbim [ 1.850419] dwc3 usbdrd: missing memory resource [ 1.852065] dwc3 fcc00000.dwc3: Failed to get clk 'ref': -2 [ 1.854511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.855125] ehci-pci: EHCI PCI platform driver [ 1.855613] ehci-platform: EHCI generic platform driver [ 1.858407] ehci-platform fd800000.usb: EHCI Host Controller [ 1.859220] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1 [ 1.860543] ehci-platform fd800000.usb: irq 11, io mem 0xfd800000 [ 1.874324] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00 [ 1.875210] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.875962] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.876616] usb usb1: Product: EHCI Host Controller [ 1.877060] usb usb1: Manufacturer: Linux 4.19.211 ehci_hcd [ 1.877564] usb usb1: SerialNumber: fd800000.usb [ 1.878690] hub 1-0:1.0: USB hub found [ 1.879090] hub 1-0:1.0: 1 port detected [ 1.882261] ehci-platform fd880000.usb: EHCI Host Controller [ 1.883022] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2 [ 1.884309] ehci-platform fd880000.usb: irq 13, io mem 0xfd880000 [ 1.897657] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00 [ 1.898517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.899271] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.899925] usb usb2: Product: EHCI Host Controller [ 1.900370] usb usb2: Manufacturer: Linux 4.19.211 ehci_hcd [ 1.900875] usb usb2: SerialNumber: fd880000.usb [ 1.902038] hub 2-0:1.0: USB hub found [ 1.902438] hub 2-0:1.0: 1 port detected [ 1.903645] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.904230] ohci-platform: OHCI generic platform driver [ 1.905010] ohci-platform fd840000.usb: Generic Platform OHCI controller [ 1.905872] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3 [ 1.906905] ohci-platform fd840000.usb: irq 12, io mem 0xfd840000 [ 1.965228] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.965981] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.966634] usb usb3: Product: Generic Platform OHCI controller [ 1.967171] usb usb3: Manufacturer: Linux 4.19.211 ohci_hcd [ 1.967705] usb usb3: SerialNumber: fd840000.usb [ 1.968796] hub 3-0:1.0: USB hub found [ 1.969193] hub 3-0:1.0: 1 port detected [ 1.970288] ohci-platform fd8c0000.usb: Generic Platform OHCI controller [ 1.971185] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4 [ 1.972193] ohci-platform fd8c0000.usb: irq 14, io mem 0xfd8c0000 [ 2.032106] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 2.032862] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.033516] usb usb4: Product: Generic Platform OHCI controller [ 2.034053] usb usb4: Manufacturer: Linux 4.19.211 ohci_hcd [ 2.034586] usb usb4: SerialNumber: fd8c0000.usb [ 2.035681] hub 4-0:1.0: USB hub found [ 2.036088] hub 4-0:1.0: 1 port detected [ 2.038126] usbcore: registered new interface driver cdc_acm [ 2.038647] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.039429] usbcore: registered new interface driver cdc_wdm [ 2.040208] usbcore: registered new interface driver uas [ 2.040856] usbcore: registered new interface driver usb-storage [ 2.041562] usbcore: registered new interface driver usbserial_generic [ 2.042186] usbserial: USB Serial support registered for generic [ 2.042791] usbcore: registered new interface driver cp210x [ 2.043324] usbserial: USB Serial support registered for cp210x [ 2.043957] usbcore: registered new interface driver ftdi_sio [ 2.044564] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.045462] usbcore: registered new interface driver keyspan [ 2.046005] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 2.046743] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 2.047433] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 2.048148] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 2.048879] usbcore: registered new interface driver option [ 2.049415] usbserial: USB Serial support registered for GSM modem (1-port) [ 2.050368] usbcore: registered new interface driver oti6858 [ 2.050942] usbserial: USB Serial support registered for oti6858 [ 2.051553] usbcore: registered new interface driver pl2303 [ 2.052089] usbserial: USB Serial support registered for pl2303 [ 2.052700] usbcore: registered new interface driver qcserial [ 2.053250] usbserial: USB Serial support registered for Qualcomm USB modem [ 2.053965] usbcore: registered new interface driver sierra [ 2.054528] usbserial: USB Serial support registered for Sierra USB modem [ 2.056122] usbcore: registered new interface driver usbtouchscreen [ 2.056759] cyttsp5_loader_init: Parade TTSP FW Loader Driver (Built TTDA.03.08.874312) rc=0 [ 2.057523] cyttsp5_device_access_init: Parade TTSP Device Access Driver (Built TTDA.03.08.874312) rc=0 [ 2.059123] i2c /dev entries driver [ 2.061294] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 2.062930] rk808 0-0020: chip id: 0x8170 [ 2.063351] rk808 0-0020: No cache defaults, reading back from HW [ 2.088113] rk808 0-0020: source: on=0x40, off=0x00 [ 2.088573] rk808 0-0020: support dcdc3 fb mode:-22, 63 [ 2.089421] rk808 0-0020: support pmic reset mode:-22,0 [ 2.092044] rk808 0-0020: had get a pinctrl! [ 2.098756] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22 [ 2.099705] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 2.100296] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 2.101277] vdd_logic: supplied by vcc_sys [ 2.102578] vdd_gpu: supplied by vcc_sys [ 2.103224] vcc_ddr: Bringing 500000uV into 1100000-1100000uV [ 2.104427] vcc_ddr: supplied by vcc_sys [ 2.105667] vcc_3v3: supplied by vcc_sys [ 2.106539] vcca1v8_pmu: supplied by vcc_sys [ 2.107830] vdda_0v9: supplied by vcc_sys [ 2.108705] vdda0v9_pmu: supplied by vcc_sys [ 2.109369] vccio_acodec: Bringing 1800000uV into 3300000-3300000uV [ 2.111454] vccio_acodec: supplied by vcc_sys [ 2.112739] vccio_sd: supplied by vcc_sys [ 2.113614] vcc3v3_pmu: supplied by vcc_sys [ 2.114914] vcc_1v8: supplied by vcc_sys [ 2.116698] vcc1v8_dvp: supplied by vcc_sys [ 2.117342] vcc2v8_dvp: Bringing 1800000uV into 2800000-2800000uV [ 2.119450] vcc2v8_dvp: supplied by vcc_sys [ 2.120112] boost: Bringing 4700000uV into 5000000-5000000uV [ 2.122136] boost: supplied by vcc_sys [ 2.122961] otg_switch: supplied by boost [ 2.123775] rk817-battery rk817-battery: Failed to find matching dt id [ 2.124679] rk817-charger rk817-charger: Failed to find matching dt id [ 2.128660] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0 [ 2.136259] rk808-rtc rk808-rtc: registered as rtc0 [ 2.138490] rk808-rtc rk808-rtc: setting system clock to 2017-08-04 09:00:10 UTC (1501837210) [ 2.141757] usbcore: registered new interface driver uvcvideo [ 2.142285] USB Video Class driver (1.1.1) [ 2.142970] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.19 [ 2.143783] rockchip-iodomain fdc20000.syscon:io-domains: pmuio1(3300000 uV) supplied by vcc3v3_pmu [ 2.144785] rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu [ 2.145713] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.17 [ 2.146519] rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3300000 uV) supplied by vccio_acodec [ 2.147454] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.20 [ 2.148290] rockchip-iodomain fdc20000.syscon:io-domains: vccio2(1800000 uV) supplied by vcc_1v8 [ 2.149225] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.18 [ 2.150033] rockchip-iodomain fdc20000.syscon:io-domains: vccio3(3300000 uV) supplied by vccio_sd [ 2.151000] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8 [ 2.151160] ata1: SATA link down (SStatus 0 SControl 300) [ 2.152359] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.13 [ 2.153167] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc_3v3 [ 2.154088] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.21 [ 2.154928] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(1800000 uV) supplied by vcc1v8_dvp [ 2.155870] rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc_3v3 [ 2.159862] rockchip-thermal fe710000.tsadc: failed to find thermal gpio state [ 2.160530] rockchip-thermal fe710000.tsadc: failed to find thermal otpout state [ 2.161702] rockchip-thermal fe710000.tsadc: tsadc is probed successfully! [ 2.163624] Bluetooth: HCI UART driver ver 2.3 [ 2.164040] Bluetooth: HCI UART protocol H4 registered [ 2.164551] Bluetooth: HCI UART protocol ATH3K registered [ 2.165263] Bluetooth: HCI UART protocol Broadcom registered [ 2.165867] usbcore: registered new interface driver bfusb [ 2.166268] dw-apb-uart fe650000.serial: got rx and tx dma channels [ 2.166453] usbcore: registered new interface driver btusb [ 2.167224] ttyS1 set divisor fail, quot:156 != dll,dlh:0 [ 2.167795] cpu cpu0: Failed to get cpu_leakage [ 2.168004] ttyS1 set divisor fail, quot:156 != dll,dlh:0 [ 2.169511] ttyS1 set divisor fail, quot:13 != dll,dlh:0 [ 2.169903] sdhci: Secure Digital Host Controller Interface driver [ 2.170563] sdhci: Copyright(c) Pierre Ossman [ 2.171000] Synopsys Designware Multimedia Card Interface Driver [ 2.172787] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode. [ 2.173617] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller. [ 2.174225] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a [ 2.174860] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo [ 2.175795] vcc3v3_sd: supplied by vcc_3v3 [ 2.176345] dwmmc_rockchip fe2b0000.mmc: Linked as a consumer to regulator.7 [ 2.177076] dwmmc_rockchip fe2b0000.mmc: Linked as a consumer to regulator.18 [ 2.177827] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO [ 2.191592] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 2.206336] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode. [ 2.207214] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller. [ 2.207873] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a [ 2.208467] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo [ 2.209476] dwmmc_rockchip fe2c0000.mmc: Linked as a consumer to regulator.9 [ 2.210278] dwmmc_rockchip fe2c0000.mmc: Linked as a consumer to regulator.20 [ 2.211043] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq [ 2.211639] mmc_host mmc2: card is non-removable. [ 2.224837] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 300000Hz, actual 187500HZ div = 1) [ 2.238262] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [ 2.257298] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 200000Hz, actual 187500HZ div = 1) [ 2.270740] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [ 2.289795] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 100000Hz, actual 93750HZ div = 2) [ 2.303205] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [ 2.331487] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 2.345219] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.347279] hidraw: raw HID events driver (C) Jiri Kosina [ 2.348381] usbcore: registered new interface driver usbhid [ 2.348891] usbhid: USB HID core driver [ 2.351502] rksfc_base v1.1 2016-01-08 [ 2.352737] usbcore: registered new interface driver snd-usb-audio [ 2.354805] rk817-codec rk817-codec: Unable to get mclk [ 2.360661] Initializing XFRM netlink socket [ 2.362093] NET: Registered protocol family 10 [ 2.403167] Segment Routing with IPv6 [ 2.403628] NET: Registered protocol family 17 [ 2.404125] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need t. [ 2.405327] can: controller area network core (rev 20170425 abi 9) [ 2.406130] NET: Registered protocol family 29 [ 2.406546] can: raw protocol (rev 20170425) [ 2.406942] can: broadcast manager protocol (rev 20170425 t) [ 2.407465] can: netlink gateway (rev 20170425) max_hops=1 [ 2.408313] Bluetooth: RFCOMM socket layer initialized [ 2.408813] Bluetooth: RFCOMM ver 1.11 [ 2.409171] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.409715] Bluetooth: HIDP socket layer initialized [ 2.410367] [BT_RFKILL]: Enter rfkill_rk_init [ 2.410770] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 2.411859] Key type dns_resolver registered [ 2.412519] flash vendor_init_thread! [ 2.412860] flash vendor storage:20170308 ret = -1 [ 2.414176] Loading compiled-in X.509 certificates [ 2.416735] Btrfs loaded, crc32c=crc32c-generic [ 2.417713] rga2: Module initialized. [ 2.431014] usb 3-1: new full-speed USB device number 2 using ohci-platform [ 2.458277] pvtm list NULL [ 2.459134] extcon extcon2: failed to create extcon usb2-phy link [ 2.459880] phy phy-fe8a0000.usb2-phy.0: Linked as a consumer to regulator.4 [ 2.460718] vcc5v0_usb20_otg: supplied by boost [ 2.461003] usb 4-1: new full-speed USB device number 2 using ohci-platform [ 2.461806] phy phy-fe8a0000.usb2-phy.5: Linked as a consumer to regulator.5 [ 2.462651] phy phy-fe8a0000.usb2-phy.5: Linked as a consumer to regulator.2 [ 2.467084] rk_gmac-dwmac fe010000.ethernet: Linked as a consumer to regulator.13 [ 2.467824] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input). [ 2.468468] rk_gmac-dwmac fe010000.ethernet: TX delay(0x30). [ 2.468983] rk_gmac-dwmac fe010000.ethernet: RX delay(0x10). [ 2.469505] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no). [ 2.470118] rk_gmac-dwmac fe010000.ethernet: clock input from PHY [ 2.475688] rk_gmac-dwmac fe010000.ethernet: init for RGMII_ID [ 2.476518] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 2.477225] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5 [ 2.477731] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported [ 2.478411] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported [ 2.479087] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported [ 2.479721] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported [ 2.480342] rk_gmac-dwmac fe010000.ethernet: TSO supported [ 2.480842] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 2.481588] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled [ 2.614306] libphy: stmmac: probed [ 2.626918] dwc3 fcc00000.dwc3: Failed to get clk 'ref': -2 [ 2.630359] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.631210] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5 [ 2.633010] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000001002010010 [ 2.633929] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xfcc00000 [ 2.634959] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.635712] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.636367] usb usb5: Product: xHCI Host Controller [ 2.636813] usb usb5: Manufacturer: Linux 4.19.211 xhci-hcd [ 2.637316] usb usb5: SerialNumber: xhci-hcd.0.auto [ 2.638458] hub 5-0:1.0: USB hub found [ 2.638858] hub 5-0:1.0: 1 port detected [ 2.639697] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.640410] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6 [ 2.641152] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 2.641851] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.642792] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 2.643542] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.644195] usb usb6: Product: xHCI Host Controller [ 2.644666] usb usb6: Manufacturer: Linux 4.19.211 xhci-hcd [ 2.645175] usb usb6: SerialNumber: xhci-hcd.0.auto [ 2.646263] hub 6-0:1.0: USB hub found [ 2.646663] hub 6-0:1.0: 1 port detected [ 2.652636] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.661401] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11 [ 2.662159] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.662821] usb 3-1: Product: USB Receiver [ 2.663201] usb 3-1: Manufacturer: Logitech [ 2.674062] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.674200] input: Logitech USB Receiver as /devices/platform/fd840000.usb/usb3/3-1/3-1:1.0/0003:046D:C52B.0001/input/input1 [ 2.676732] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.677520] cfg80211: failed to load regulatory.db [ 2.700063] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [ 2.700811] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.701517] usb 4-1: Product: USB Null Modem Cable [ 2.701958] usb 4-1: Manufacturer: FTDI [ 2.702311] usb 4-1: SerialNumber: FTBF8DH3 [ 2.708280] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected [ 2.709056] usb 4-1: Detected FT232RL [ 2.712262] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 2.731964] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-fd840000.usb-1/input0 [ 2.740494] input: Logitech USB Receiver Mouse as /devices/platform/fd840000.usb/usb3/3-1/3-1:1.1/0003:046D:C52B.0002/input/input2 [ 2.742102] input: Logitech USB Receiver Consumer Control as /devices/platform/fd840000.usb/usb3/3-1/3-1:1.1/0003:046D:C52B.0002/input/input3 [ 2.797997] input: Logitech USB Receiver System Control as /devices/platform/fd840000.usb/usb3/3-1/3-1:1.1/0003:046D:C52B.0002/input/input4 [ 2.799748] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-fd840000.usb-1/input1 [ 2.807084] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-fd840000.usb-1/input2 [ 3.057754] ALSA device list: [ 3.058047] No soundcards found. [ 3.062300] Freeing unused kernel memory: 1792K [ 3.062933] Run /init as init process [ 4.330988] Bluetooth: hci0: command 0x0c03 tx timeout [ 5.507645] vendor storage:20190527 ret = -1 [ 12.224326] Bluetooth: hci0: BCM: Reset failed (-110) [ 12.344354] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 300000Hz, actual 187500HZ div = 1) [ 12.357792] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [ 19.234354] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 200000Hz, actual 187500HZ div = 1) [ 19.247793] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [ 25.321017] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 100000Hz, actual 93750HZ div = 2) [ 25.334449] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [ 33.771032] vcc3v3_pcie_p: supplied by vcc_3v3 [ 33.771572] vcc3v3_pcie_p: disabling [ 33.771907] vcc3v3_sd: disabling