This is the Brexit edition of pscan

Installing this update uses the pscan.eu website, but once it is installed it will from then on use the pscan.uk website.
This paves the way for us to stop using the .eu domain. The software is now rebranded pscan.uk

On the Mac OSX version the application will be installed into /Applications/pscan.uk
if you previously had an older version then pscanloader will be copied to both /Applications/pscan.uk and /Applications/pscan.eu
Whichever one you use it will launch the actual application from /Applications/pscan.uk
You probably should reconfigure the X11 applications launcher as described here http://pscan.uk/install/macosx.html

For Windows and Linux the software will stay in the same folder as where you previously installed it.

The new version also checks that the K line is not shorted to 12V with a short pulse before using it. This is due to a customer destroying their interface. It isn't clear how they did this but this check adds a layer of protection against the interface being damaged from this scenario.

Freelander Teves Mk20 ABS is now supported.

Wheel speed sensor information for the Teves Mk25 has had a bug fixes which caused it to display the wrong speed.

The previous version 041D details are here.

Great, amazing, a truly worthwhile update. God knows how you install it on windows though, lots of info on how to do it on a Mac.

1. Connect laptop to Internet.
2. Run pscanloader.
3. Follow on screen instructions to upgrade.

1.Laptop connected.
2. Pscan loader running.
3. Instructions are -
A - Select Port - nothing happens, just goes blue.
B - FTDI Driver not loaded.

What do I do next??????????????????
(Apart from cry, that is.)

4. Exit from pscan if it's running
5a. If you are running Windows 7, 8 or 10 download this file http://www.ftdichip.com/Drivers/CDM/CDM21228_Setup.zip
5b. If you are running Windows XP or Vista download this file http://www.ftdichip.com/Drivers/CDM/CDM20824_Setup.exe
5c. If you are running Windows 2000 download this file http://www.ftdichip.com/Drivers/CDM/Win2k/CDM20600.exe
6. If you are running Windows 7,8 or 10 then unzip the CDM21228_Setup.zip file
7. Right click on the CDMwhatever.exe file
8. Select "Run as administrator" and put your admin password if necessary (i'm not sure about 2000/XP, maybe just double click)
9. Follow the instructions to install the driver
10. Plug in your pscan box to the USB port on the laptop. You don't need to connect to the car at this point.
11. Run pscanloader
12. Now the interface should be detected. You should see a serial number in "Select port here"
13. Click Next
14. You will get an "Interface not powered" error. This means that everything is installed, the interface is powered from your car.
15. Go to the car, plug in and try it.